The simplified contour plug-in is very suitable for dealing with overly complex contours imported from DWG files.The contour (line) is optimized by inputting the angle value. The continuous line segment smaller than the input angle can be optimized into a line, and the processed continuous line can also be welded. ...

This command can generate spiral curve along the curve path, flexibly set multiple options, and generate circular pipe at the same time.

SketchUp's own path follow function can only follow the opposite side, and this command can directly follow the line (Loft).

Select the face to be filled, and then click the command. At this time, enter the angle and spacing of the slash to automatically fill. After filling, the bevels of the generated faces are grouped separately.

A very powerful tool for selecting lines. You can select a line from a pile of disorderly intersecting lines.

In Su, the circle defaults to 24 segments and the arc defaults to 12 segments. Everyone should have met the situation that after the CAD was imported into Su and before the cover, due to the small number of arc segments, the accuracy is not high, it is difficult to see, and it can not meet the requirements of modeling. In the past, you can only select a single line and right-click to modify the segment with its own functions

SketchUp's last quick and intelligent cover tool is very light and easy to use. A one-stop process, you can set options to extend the sideline, delete the short line, delete the broken line, automatic interleaving, face up, flatten the graph, and close the graph! Necessary functions for processing imported CAD drawings on SketchUp. ...

Face to face extension, cutting.

The selected planes can be offset in batches.

The intelligent offset plug-in can select one or more faces for batch offset, and at the same time, it can intelligently process the sharp corners to prevent the generation of messy offset lines.Please note: sketchup2017 has fixed the default offset tool tip handling issue. ...