Mark the solar exposure data, including solar altitude angle, summer solstice, winter solstice, spring equinox, latitude, longitude, altitude and azimuth. You can also see the incidence angle, percentage of exposure, horizontal shadow angle and vertical shadow angle.The "incident light" generated during annotation is presented as an auxiliary dotted line, and auxiliary points and

Cut a group object by elevation. This function can quickly divide the area with specific height. For example, it can be divided into snow covered area above a certain elevation of the terrain, or it needs to be cut layer by layer when drawing simple buildings.be careful:The cutting line is in the group by default.After cutting, a wireframe group will be generated, such as

This is a simple dynamic setting tool. By setting properties like sliding bar movement and hinge rotation for group or component objects, click the object to show the corresponding switch dynamics. It allows you to easily slide drawers in the cabinet model, rotate doors and windows in the house, and switch between the positions of any object you set

This is a very convenient animation demo gadget! Select the group or component as the center to rotate the view around the body. During rotation, the view can be changed at any time to observe the object. You can click stop, acceleration and deceleration to control the rotation. The value box in the lower right corner will display the rotation speed. If you do not select objects, wrap around all models

This is a practical tool for building, indoor and landscape modeling. The components can be placed on the surface of double-sided wall. After executing the command, the holes can be opened quickly, and the holes of components can be processed in batch. The opening is associated with the component and moves with the movement of the component.The components used for opening holes have requirements:1. Components must be created with

This is a tool that uses a profile to follow a mouse line or turn a loft. This tool has four commands. In addition to drawing, you can also create, rename and delete your sections. The function of new section is very convenient for making all kinds of gypsum lines, skirting lines and columns, because once made, it will maintain

After setting the stair step size and type, quickly draw the stair step. When drawing, you can preview the effect. What you see is what you get. Stairs are drawn with their own materials.1. The width and direction of the stair step are controlled by the mouse. Click to create a step, and double-click to finish drawing.2. To set a breakpoint on any step, press the & | X & | key. Like a

Simply and quickly draw a variety of railings of different types and selected heights, which can be used for fences, stair railings, or composite railings. It includes 11 common and beautiful types, such as horizontal bar railing, vertical bar railing, iron railing and glass railing.1. Set the railing height, select the railing type, and then click the draw bar without restrictions

Quickly draw the column in SketchUp. When drawing, you can preview the size and direction of the column. After drawing, the concrete volume, reinforcement length, reinforcement volume, stirrup length and stirrup volume will be automatically calculated, and these information will be displayed on the column. The concrete, reinforcement and stirrup of the column have default drawn materials.be careful...

Quickly draw a rectangular beam in SketchUp. When drawing, you can preview the size of the beam. After drawing, the concrete volume, reinforcement length, reinforcement volume, stirrup length and stirrup volume will be automatically calculated, and these information will be displayed on the beam. The concrete, reinforcement and stirrup of the beam have default drawn materials.Note this