This tool can not only keep the z-axis path free of deflection when lofting, but also set the x-axis and y-axis, and even select a segment of line as the axis to keep the non deflection.

This command has the following basic functions: select vertical edge line, horizontal edge line or bevel line, vertical face, horizontal face or bevel, and set the tilt angle range when selecting bevel edge or face. You can also select by the number of vertices on a face. ...

This command can rename groups and components with the name of the layer, and automatically add a number prefix or suffix, such as door - 001, door - 002, door - 003

Cleans up all lines on the same face in the selected object.

SketchUp itself is weak in point selection and editing, and this command makes up for this. You can move, rotate and scale points on the surface of the object. You can also set the selection range to increase the soft selection of auxiliary points. ...

You can operate on groups and components that only include 2D content. When this group or component overlaps with a face, it can perform Boolean operations on the face.

Modify the model by changing the edge length of the model and the distance between the two edges.Two uses:1. Click edge line, enter length2. Drag two sidelines, enter distance

Adjust and organize the terrain with slope, its characteristics are that it can display the elevation of each vertex and the slope of each face in real time; it can directly click the point, line or face to set its elevation; it can match the slope of the two selected faces; it can also generate the slope direction line and slope. ...

By scanning all the contents displayed on the screen, recognize the positive and negative faces of all the faces of the camera, and automatically flip the back.Three modes are optional (high / normal / medium), the higher the accuracy of scanning pixels, and the longer the scanning time; and vice versa. ...

The simplified contour plug-in is very suitable for dealing with overly complex contours imported from DWG files.The contour (line) is optimized by inputting the angle value. The continuous line segment smaller than the input angle can be optimized into a line, and the processed continuous line can also be welded. ...